25 Best Omer Stingrays

 

Omer Stingray Fins 43-44 9-10

Omer Stingray Fins (43-44 (9-10))

Omer Stingray Fins (43-44 (9-10)) - Omer stingray freediving, spearfishing full foot pocket long blade fins. 22 degree angle between foot-pocket and blade (compared to traditional 15/17 degree). Fixed blade fins, characterized by their thermo rubber foot-pocket. House of scuba is an authorized omer dealer. The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort.

 

OMER Stingray Carbon Fiber CAMU 3D Freediving Fins - 3 Stiffnesses Available 4748 US Mens Size 13-14-20

OMER Stingray Carbon Fiber CAMU 3D Freediving Fins – 3 Stiffnesses Available (47/48 (US Men’s Size 13-14)-20)

OMER Stingray Carbon Fiber CAMU 3D Freediving Fins – 3 Stiffnesses Available (47/48 (US Men’s Size 13-14)-20) - The foot pockets are available in sizes 39/40, 41/42, 43/44, 45/46, 47/48 and 49/50. This technology allows to put a film with the bottom sea picture directly on the carbon surface during the blade molding to assure a high resistance to abrasion. House of scuba is an authorized omer dealer. This new stingray carbon version have a special 3d camouflage finish reproducing exactly a typical sea bottom. Available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard).

 

Omer Stingray Fins 47-48 12-14

Omer Stingray Fins (47-48 (12-14))

Omer Stingray Fins (47-48 (12-14)) - Available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). This new stingray carbon version have a special 3d camouflage finish reproducing exactly a typical sea bottom. House of scuba is an authorized omer dealer. The foot pockets are available in sizes 39/40, 41/42, 43/44, 45/46, 47/48 and 49/50. This technology allows to put a film with the bottom sea picture directly on the carbon surface during the blade molding to assure a high resistance to abrasion.

 

OMER Stingray Carbon Fiber Freediving Fins - 3 Stiffnesses Available 4950US Mens Size 14-15-30

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-30)

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-30) - Thanks to this technology, carbon fiber strands are perfectly impregnated in the resin, without the risk of forming micro bubbles and with an optimal distribution of the resin itself. In addition, the amount of resin used is considerably reduced with a great increase in performance of the blade. The interchangeable blades are available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). The fin design is rounded off with a very comfortable thermo-rubber footpocket. Aside from not tiring out the diver’s leg while kicking on the surface for extended periods, the stingray carbon blades push the diver the most during descents and ascents, even at great depths. Stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process.

 

Omer Stingray Camu 3D Fins - Camu 3D - 47-48

Omer Stingray Camu 3D Fins – Camu 3D – 47-48

Omer Stingray Camu 3D Fins – Camu 3D – 47-48 - The 3d camouflage pattern is obtained using the new iml technology, for the first time employed by omer for the spearfishing equipments. A film with the bottom sea picture is put directly on the blade during the molding to assure a high resistance to abrasion. Available in sizes 39/40, 41/42, 43/44, 45/46, 47/48 and 49/50. This is the new camouflage release of traditional stingray fins. This blades are a little stronger than black stingray blades.

 

OMER Stingray Fins with Black Blade Size 4546

OMER Stingray Fins with Black Blade, Size 45/46

OMER Stingray Fins with Black Blade, Size 45/46 - These new fixed blade fins are characterized by their thermo rubber foot-pocket and for the angle between foot-pocket and blade being 22 degrees (compared to traditional 15/17 degree). The blades are produced in a low modular polypropylene. See sizing chart below under the specification tab. The use of thermo rubber of two different stiffness compounds increases comfort over normal foot-pockets. The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort.

 

Omer Stingray Fins - Black - 43-44

Omer Stingray Fins – Black – 43-44

Omer Stingray Fins – Black – 43-44 - The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort. These new fixed blade fins are characterized by their thermo rubber foot-pocket and for the angle between foot-pocket and blade being 22 degrees (compared to traditional 15/17 degree). The use of thermo rubber of two different stiffness compounds increases comfort over normal foot-pockets. Available in sizes 41-42,43-44,45-46,47-48. The blades are produced in a low modular polypropylene.

 

Sopras Sub Freediving Package with Mask Snorkel Bag and Long Fins Size M 9-10 similar to Omer Stingray fin Aqua Lung Micro mask and Mares Fin Bag Snorkeling Scuba Diving Spearfishing Freedive

Sopras Sub Freediving Package with Mask Snorkel Bag and Long Fins Size M (9-10) similar to Omer Stingray fin Aqua Lung Micro mask and Mares Fin Bag Snorkeling Scuba Diving Spearfishing Freedive

Sopras Sub Freediving Package with Mask Snorkel Bag and Long Fins Size M (9-10) similar to Omer Stingray fin Aqua Lung Micro mask and Mares Fin Bag Snorkeling Scuba Diving Spearfishing Freedive - X-race fins overall length 35 inches (89 cm) weight of pair 4 lbs (1. Its structure positions the lenses near the ocular orbit (recesses) of the eyes, which improves peripheral vision. Dixie divers long fin bag easily fits freediving fins, mask and snorkel front accessory pocket padded adjustable shoulder strap heavy duty 1100 denier durable mesh allows for draining of water heavy duty zippers length 37″ width 10″. It is easy to clear and a great choice for freedivers or any diver that wants to reduce in-water drag. 8 kg) fins designed purposely for spearfishing and free-diving with special tri-material construction technology, comfortable and soft thermo rubber foot pocket, high density tpr perimeter reinforcement providing the connection and strength needed between the blade and the foot pocket, extra long and flexible blade giving a spring-like feel and ultra fast acceleration with excellent reaction time. Fondo snorkel a soft, flexibe snorkel with a one-way purge valve at the bend. Great for freediving and snorkeling. The rib-like structures on the side and blade surface are hydro-dynamic and channel water directly backwards keeping energy loss at minimum level similar to the omer stingray fins carina mask modeled after the aqua lung micromask, the carina delivers a wide-angle view in a low-volume package.

 

OMER Stingray Carbon 25 Fins Size 3940

OMER Stingray Carbon 25 Fins, Size 39/40

OMER Stingray Carbon 25 Fins, Size 39/40 - In addition the percentage of necessary resin is reduced considerably more than before with a great increase in performance characteristics of the blade. The specific carbon fiber strand used was developed specifically for the manufacture of freediving fins and patented. See sizing chart below under the specification tab. Aside from not tiring out the divera€s legs while kicking on the surface for extended periods the stingray carbon blades push the diver the most during descents and ascents even in great depths. The new stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. The under lying result is a very comfortable fin, in part thanks to the thermo-rubber foot-pockets, providing high performance to the diver. Thanks to this technology the carbon fiber strands are impregnated perfectly in the resin without the risk of forming micro bubble kicks and with an optimal distribution of the resin itself. The interchangeable blades are available in three degrees of stiffness 20 soft, 25 medium, and 30 hard.

 

OMER Stingray Carbon Fiber Freediving Fins - 3 Stiffnesses Available 4950US Mens Size 14-15-25

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-25)

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-25) - The fin design is rounded off with a very comfortable thermo-rubber footpocket. In addition, the amount of resin used is considerably reduced with a great increase in performance of the blade. Stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. The interchangeable blades are available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). Thanks to this technology, carbon fiber strands are perfectly impregnated in the resin, without the risk of forming micro bubbles and with an optimal distribution of the resin itself. Aside from not tiring out the diver’s leg while kicking on the surface for extended periods, the stingray carbon blades push the diver the most during descents and ascents, even at great depths.

 

Omer Stingray Fin Brown Camo 3D Size 4344 9-10

Omer Stingray Fin, Brown Camo 3D, Size 43/44 (9-10)

Omer Stingray Fin, Brown Camo 3D, Size 43/44 (9-10) - This blade is slightly stiffer than the black stingray blade. A film with sea bottom photo is put directly on the blade during molding to assure high resistance to abrasion. Brown blade pattern and foot pocket. The 3d camouflage pattern is obtained using iml technology, employed for the first time by omer for spearfishing gear. Camouflage release of traditional stingray fins.

 

Omer Stingray Fins 39-40 6-7

Omer Stingray Fins (39-40 (6-7))

Omer Stingray Fins (39-40 (6-7)) - The foot pockets are available in sizes 39/40, 41/42, 43/44, 45/46, 47/48 and 49/50. Available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). House of scuba is an authorized omer dealer. This new stingray carbon version have a special 3d camouflage finish reproducing exactly a typical sea bottom. This technology allows to put a film with the bottom sea picture directly on the carbon surface during the blade molding to assure a high resistance to abrasion.

 

OMER Stingray Camu 3D Carbon 25 Fins Size 3940

OMER Stingray Camu 3D Carbon 25 Fins, Size 39/40

OMER Stingray Camu 3D Carbon 25 Fins, Size 39/40 - See sizing chart below under the specification tab. This technology places a film with the bottom sea picture directly on the carbon surface during the blade molding to assure a high resistance to abrasion. This new stingray carbon version has a special 3d camouflage finish reproducing exactly a typical sea bottom. This has been possible using the new technology iml, for the first time employed by omer for the spearfishing equipments.

 

Omer Stingray Fins - Black - 45-46

Omer Stingray Fins – Black – 45-46

Omer Stingray Fins – Black – 45-46 - The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort. Available in sizes 41-42,43-44,45-46,47-48. These new fixed blade fins are characterized by their thermo rubber foot-pocket and for the angle between foot-pocket and blade being 22 degrees (compared to traditional 15/17 degree). The blades are produced in a low modular polypropylene. The use of thermo rubber of two different stiffness compounds increases comfort over normal foot-pockets.

 

OMER Stingray Carbon 20 Fins Size 4344

OMER Stingray Carbon 20 Fins, Size 43/44

OMER Stingray Carbon 20 Fins, Size 43/44 - Thanks to this technology, carbon fiber strands are perfectly impregnated in the resin, without the risk of forming micro bubbles and with an optimal distribution of the resin itself. In addition, the amount of resin used is considerably reduced with a great increase in performance and durability of the blade. •Stingray dual hardness foot pocket is extremely comfortable •carbon fiber blade produced by a infusion double vacuum process producing one of the most durable carbon fiber blades available •interchangeable blades •3 stiffness’s 20 (soft), 25 (medium), 30 (hard). Aside from not tiring out the diver’s leg while kicking on the surface for extended periods, the stingray carbon blades push the diver the most during descents and ascents, even at great depths. Stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. The fin design is rounded off with a very comfortable thermo-rubber foot pocket.

 

OMER Stingray Carbon 30 Fins Size 4142

OMER Stingray Carbon 30 Fins, Size 41/42

OMER Stingray Carbon 30 Fins, Size 41/42 - •Stingray dual hardness foot pocket is extremely comfortable •carbon fiber blade produced by a infusion double vacuum process producing one of the most durable carbon fiber blades available •interchangeable blades •3 stiffness’s 20 (soft), 25 (medium), 30 (hard). The fin design is rounded off with a very comfortable thermo-rubber foot pocket. Stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. Aside from not tiring out the diver’s leg while kicking on the surface for extended periods, the stingray carbon blades push the diver the most during descents and ascents, even at great depths. Thanks to this technology, carbon fiber strands are perfectly impregnated in the resin, without the risk of forming micro bubbles and with an optimal distribution of the resin itself. In addition, the amount of resin used is considerably reduced with a great increase in performance and durability of the blade.

 

OMER Stingray Freediving Spearfishing Full Foot Pocket Long Blade Fins FREE DXDIVER FIN BAG Free diving fin scuba diving apnea

OMER Stingray Freediving, Spearfishing Full Foot Pocket Long Blade Fins FREE DXDIVER FIN BAG Free diving fin scuba diving apnea

OMER Stingray Freediving, Spearfishing Full Foot Pocket Long Blade Fins FREE DXDIVER FIN BAG Free diving fin scuba diving apnea - Fixed blade fins, characterized by their thermo rubber foot-pocket. Omer stingray freediving, spearfishing full foot pocket long blade fins. 22 degree angle between foot-pocket and blade (compared to traditional 15/17 degree). The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort. Free dxdiver fin bag.

 

Omer Stingray Fins 49-50 14-16

Omer Stingray Fins (49-50 (14-16)

Omer Stingray Fins (49-50 (14-16) - The stingray angle is 22 degrees. The 22 degree angle optimizes the power of the push through the water relative to effort. These fixed blade fins are characterized by their thermo rubber foot-pocket and the angle between the foot-pocket and the blade traditional fins, even freediving fins, are 15 to 17 degrees. Please select one size smaller for women. The use of thermo rubber of two different compounds increases comfort over normal foot-pockets.

 

OMER Stingray Carbon Fiber Freediving Fins - 3 Stiffnesses Available 4950US Mens Size 14-15-20

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-20)

OMER Stingray Carbon Fiber Freediving Fins – 3 Stiffnesses Available (49/50(US Mens Size 14-15)-20) - Thanks to this technology, carbon fiber strands are perfectly impregnated in the resin, without the risk of forming micro bubbles and with an optimal distribution of the resin itself. Stingray carbon fins feature carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. The interchangeable blades are available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). The fin design is rounded off with a very comfortable thermo-rubber footpocket. In addition, the amount of resin used is considerably reduced with a great increase in performance of the blade. Aside from not tiring out the diver’s leg while kicking on the surface for extended periods, the stingray carbon blades push the diver the most during descents and ascents, even at great depths.

 

Omer Stingray Fins 41-42 7-8

Omer Stingray Fins (41-42 (7-8))

Omer Stingray Fins (41-42 (7-8)) - House of scuba is an authorized omer dealer. The foot pockets are available in sizes 39/40, 41/42, 43/44, 45/46, 47/48 and 49/50. This technology allows to put a film with the bottom sea picture directly on the carbon surface during the blade molding to assure a high resistance to abrasion. Available in three degrees of stiffness 20 (soft), 25 (medium) and 30 (hard). This new stingray carbon version have a special 3d camouflage finish reproducing exactly a typical sea bottom.

 

OMER Stingray Carbon Fin Blade 30

OMER Stingray Carbon Fin Blade, 30

OMER Stingray Carbon Fin Blade, 30 - In addition the percentage of necessary resin is reduced considerably more than before with a great increase in performance characteristics of the blade. The under lying result is a very comfortable fin, in part thanks to the thermo-rubber foot-pockets, providing high performance to the diver. The new stingray carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. The specific carbon fiber strand used was developed specifically for the manufacture of freediving fins and patented. Aside from not tiring out the divera€s legs while kicking on the surface for extended periods the stingray carbon blades push the diver the most during descents and ascents even in great depths. Sold as a single blade. Thanks to this technology the carbon fiber strands are impregnated perfectly in the resin without the risk of forming micro bubble kicks and with an optimal distribution of the resin itself.

 

X-Race Freediving Long Fins Large Size 11-12 Free diving fin scuba diving similar Omer stingray apnea diving FREE 3mm Socks

X-Race Freediving Long Fins Large Size 11-12 Free diving fin scuba diving similar Omer stingray apnea diving FREE 3mm Socks

X-Race Freediving Long Fins Large Size 11-12 Free diving fin scuba diving similar Omer stingray apnea diving FREE 3mm Socks - The rib-like structures on the side and blade surface are hydro-dynamic and channel water directly backwards keeping energy loss at minimum level. Fins designed purposely for spearfishing and free-diving with special tri-material construction technology, comfortable and soft thermo rubber foot pocket, high density tpr perimeter reinforcement providing the connection and strength needed between the blade and the foot pocket, extra long and flexible blade giving a spring-like feel and ultra fast acceleration with excellent reaction time.

 

OMER Stingray Freediving Spearfishing Full Foot Pocket Long Blade Fins 4344 US Mens Size 9-10

OMER Stingray Freediving, Spearfishing Full Foot Pocket Long Blade Fins (43/44 (US Mens Size 9-10))

OMER Stingray Freediving, Spearfishing Full Foot Pocket Long Blade Fins (43/44 (US Mens Size 9-10)) - House of scuba is an authorized omer dealer. The 22 degree angle is the result of trying to optimize the power of the push through the water relative to effort. 22 degree angle between foot-pocket and blade (compared to traditional 15/17 degree). Omer stingray freediving, spearfishing full foot pocket long blade fins. Fixed blade fins, characterized by their thermo rubber foot-pocket.

 

OMER Stingray Fin Foot Pocket Size 4546

OMER Stingray Fin Foot Pocket, Size 45/46

OMER Stingray Fin Foot Pocket, Size 45/46 - Sold as a single pocket. See sizing chart below under the specification tab. The foot pocket is produced with natural rubber in two different stiffness compounds throughout the different sections of the pocket to maximize the efficiency of the stroke without compromising comfort. Mounting kit (not included) is required to assemble to a blade. Omersub interchangeable foot pocket has been designed and developed internally by our technicians and it is manufactured with newest rubber compression molding technologies existing today. Mounting kit can be purchased separately. The internal geometry of the foot pocket, thanks to the great experience of beta tools in the production of safety shoes, has been ergonomically designed to fit with total comfort.

 

Omer Stingray Assembly Kits Set of 2

Omer Stingray Assembly Kits (Set of 2)

Omer Stingray Assembly Kits (Set of 2) - Assembly kit for stingray blade and foot pocket comes with 2 screws, 1 mounting plate, 1 toe plate and 2 side clips can only be used to build or repair 1 fin.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.