15 Best Backplates in 2018

 

New Hollis Elite II Adjustable Scuba Diving Harness System wo Backplate Size X-Large2X-Large

New Hollis Elite II Adjustable Scuba Diving Harness System w/o Backplate (Size X-Large/2X-Large)

New Hollis Elite II Adjustable Scuba Diving Harness System w/o Backplate (Size X-Large/2X-Large) - Backplate sold separately. Adjustable shoulder straps w/ quick release buckles provide easier donning and doffing of equipment. Adjustable sternum strap included allows for custom fit. 316 “marine grade” stainless steel used for all hardware waist buckle. Adjustable and removable shoulder pads w/ 3 adjustable stainless steel bent d-rings on each side.

 

Hollis Backplate Backpad with bookscrews

Hollis Backplate Backpad with bookscrews

Hollis Backplate Backpad with bookscrews - Pad is constructed of sturdy and durable nylon with sewn edge tape making your dive a more comfortable experience. Pad is easy to install with six book screws to fasten to your back plate. Add some cushion and comfortable support to your back plate with this hollis back plate back pad with book screws. Being a technical diver does not mean you have to uncomfortable when you are diving.

 

Zeagle Express Tech Backplate

Zeagle Express Tech Backplate

Zeagle Express Tech Backplate - Also our 20 pound rear weight system can easily be added to the back of the plate. The unique back plate is reinforced with a polymer material that gives the support needed and the flex desired for a comfortable fit. Two sets of center plate grommets allow for attaching twin cylinder assemblies via the bolt and nut arrangement that most tech systems use. Any of zeagle’s backplate bladders can be used with this system from 24 pounds up to 85 pounds of lift. Lightweight and versatile, polymer reinforced, non metal backplate. The 20pound “ziptouch” or zeagle’s ripcord weight system can be added to the plate with stainless steel screw fasteners. An optional pad kit is available to increase comfort at the shoulders and back.

 

Scuba Choice Tech Diving Aluminum Backplate Green

Scuba Choice Tech Diving Aluminum Backplate, Green

Scuba Choice Tech Diving Aluminum Backplate, Green - -measurement 15″ x 10″. -Plate thickness 2mm -11″ on-center holes for mounting doubles -1″ and 2″ slots on the bottom for crotch straps -3/8″ slots for lift bag sleeves or other accessories. Item weight 1lb 12oz.

 

Zeagle Backplate Combo Pack

Zeagle Backplate Combo Pack

Zeagle Backplate Combo Pack - The backplate combo is an expandable platform for building your ultimate setup. With its capability to mount single or double cylinders, along with crotch straps, scooter rings, sling bottles, shoulder pads, torch canisters and more, zeagles durable stainless steel backplate with simple, single-webbing harness, gives divers endless options to customize.

 

Apeks Backplate Stainless Steel

Apeks Backplate Stainless Steel

Apeks Backplate Stainless Steel - Offered in either 304 stainless steel. 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders in addition, a corresponding lower center slot allows for lower band bolts that are misaligned. The stainless steel weighs approx 5 lbs (22 kg). 2″ wide crotch strap slot. Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories.

 

Scubapro X-Tek Stainless Steel Backplate

Scubapro X-Tek Stainless Steel Backplate

Scubapro X-Tek Stainless Steel Backplate - 6oz (170g). Made in usa. Constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance quick-dry foam padding with an open-cell porous design allows the pad to release water and dry in a hurry. 105 inches wide x 16-inches high (27cm x 41).

 

Dive Rite Harness - For Backplate - Deluxe Wqr

Dive Rite Harness – For Backplate – Deluxe W/qr

Dive Rite Harness – For Backplate – Deluxe W/qr - Measurement 12″ x 25″, thickness 2mm. Mounting hardware included. Convenient-way to attach cam straps to hard metal back plate w/o tank band slots.

 

Hollis Backplate Aluminium or Stainless Steel Options for Harness Systems Aluminium

Hollis Backplate Aluminium or Stainless Steel Options for Harness Systems, Aluminium

Hollis Backplate Aluminium or Stainless Steel Options for Harness Systems, Aluminium - 5lbs 316 stainless. Stainless plate, 5. The base for building your custom hollis harness system. Travelers choice. Aluminum plate, 2lbs black hard anodized. Electropolished. 5052 aluminum. Hand de-burred.

 

Palantic Techical Diving Stainless Steel Backplate with Harness System and Pad with 8 Bookscrews

Palantic Techical Diving Stainless Steel Backplate with Harness System and Pad with 8 Bookscrews

Palantic Techical Diving Stainless Steel Backplate with Harness System and Pad with 8 Bookscrews - Material stainles steel. Harness system & crotch strap with stainless steel buckle and d-rings. Backplate pad measurement 14″ x 11″, w/ 8 bookscrews. 2″ nylon webbing, 5 stainless steel d-rings, and 1 stainless steel buckle. Backplate size 15-3/4″ x 10″, thickness 3mm.

 

OMS Backplate Pad wAssembly Screws

OMS Backplate Pad w/Assembly Screws

OMS Backplate Pad w/Assembly Screws - The pad is attached to the perimeter of the backplate with stainless steel book screws (included). The oms backplate pad can be installed on the oms backplates to create an additional layer of comfort. The pad also offers a unique accessory pocket accessed along the bottom of the pad that can be used for lift bag or marking tube storage. When diving without a wetsuit or with only minimal thermal protection, the additional padding provides the desired comfort for enjoyable and extended dives.

 

OMS Stainless Steel Backplate wComfort Harness II - SmallMedium

OMS Stainless Steel Backplate w/Comfort Harness II – Small/Medium

OMS Stainless Steel Backplate w/Comfort Harness II – Small/Medium - 6 kg) and include the following slots 1″ and 2″ (2. 54cm and 5. Back plate and harness come with an owner’s manual and are covered by a 12 month limited warranty. Plate has 22 holes for flexibility in accessory mounting. The waist strap is equipped with a latch style stainless steel buckle and the adjustable torso and chest (sternum) straps are equipped with squeeze-style” side-release plastic buckles for easy donning and doffing. 1cm) width crotch strap, (2) cam band, and a bottom slot to accommodate band bolts that are slightly off 11″ (27. Stainless steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. 94cm) on center. 75 lbs (2. Harness system with (4) chest mounted d-rings, (2) waist strap d-rings and a crotch strap o-ring all made from corrosion resistant stainless steel. The stainless back plate weighs only 5. Harness the oms comfort harness system ii is perfect for those who want a quality diving harness. The comfort harness now incorporates a pull dump tunnel on each shoulder pad. The comfort harness system ii is a direct over the shoulder harness. Back plates oms’s superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and bc’s.

 

Dive Rite XT Backplate Pad

Dive Rite XT Backplate Pad

Dive Rite XT Backplate Pad - 6oz (170g). 105 inches wide x 16-inches high (27cm x 41). Constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance quick-dry foam padding with an open-cell porous design allows the pad to release water and dry in a hurry. Made in usa.

 

YakAttack AMS-1004 LeverLock HD Kayak Anchor Trolley with backplates includes Free ParacordPliers Fits Hobie Jackson Wilderness Perception Bonafide Feelfree NuCanoe Old Town

YakAttack AMS-1004 LeverLock HD Kayak Anchor Trolley with backplates, includes Free #ParacordPliers (Fits: Hobie, Jackson, Wilderness, Perception, Bonafide, Feelfree, NuCanoe, Old Town)

YakAttack AMS-1004 LeverLock HD Kayak Anchor Trolley with backplates, includes Free #ParacordPliers (Fits: Hobie, Jackson, Wilderness, Perception, Bonafide, Feelfree, NuCanoe, Old Town) - Ams-1004 includes 2 additional pad eyes and backing plates for the stealth pulleys. Easy installation , utilizes new yakattack stealth pulleys. 35′ of highly reflective usa-made 550 paracord includes all necessary hardware for installation. Includes free paracord pliers (buyer will receive side cutters or needle nose in their package).

 

Scuba Choice Tech Diving Aluminum Backplate Purple

Scuba Choice Tech Diving Aluminum Backplate, Purple

Scuba Choice Tech Diving Aluminum Backplate, Purple - -measurement 15″ x 10″. Item weight 1lb 12oz. -Plate thickness 2mm -11″ on-center holes for mounting doubles -1″ and 2″ slots on the bottom for crotch straps -3/8″ slots for lift bag sleeves or other accessories.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.